NEMA · IEC · Hazardous area
Electric Motors
Premium-efficiency, severe-duty, IEEE 841 and hazardous-location motors for process plants.
Overview
From fractional-horsepower drives to large low- and high-voltage machines, we supply motors built for the duty they will actually see: dust, washdown, crusher shock loads, inverter drives and hazardous gas zones.
Send us the nameplate of the motor you are replacing, or the load, speed, voltage, frame and area classification, and we will match a model and confirm delivery time.
Principal brands
We work with several reputable principals in this line and recommend the right one for your duty and budget.
Where it’s used
- Pumps, fans & compressors
- Crushers & conveyors
- Hazardous (Ex) process areas
- Food & pharma washdown lines
15 · The range
Electric Motors
- ELE-001 →
Severe Duty & General Purpose: NEMA Premium
High-efficiency and NEMA Premium motors for continuous duty, cutting energy use on pumps, fans and compressors.
- Category
- NEMA Premium efficiency
- Standards
- NEMA / IEC (per model)
- ELE-002 →
Crusher Duty Motors
Motors with reinforced shafts, bearings and frames to survive the shock loads of crushers and mills.
- Category
- High-torque, shock-load duty
- Standards
- NEMA / IEC (per model)
- ELE-003 →
IEEE 841™ Motors
Petroleum and chemical industry severe-duty motors built to the IEEE 841 standard.
- Category
- IEEE 841 severe duty
- Standards
- NEMA / IEC (per model)
- ELE-004 →
Definite Purpose Motors
Motors designed for one application, such as farm duty, fans, brakes or close-coupled pumps.
- Category
- Application-specific
- Standards
- NEMA / IEC (per model)
- ELE-005 →
Fractional Motors
Small AC and DC motors under 1 HP for light machinery, fans and equipment.
- Category
- Below 1 HP
- Standards
- NEMA / IEC (per model)
- ELE-006 →
IEC Tru-Metric Motors
IEC-frame motors with metric dimensions for European-designed machinery.
- Category
- IEC metric frames
- Standards
- NEMA / IEC (per model)
- ELE-007 →
AEGIS® Inside
Inverter-duty motors with shaft grounding to protect bearings from VFD-induced currents.
- Category
- Bearing current protection
- Standards
- NEMA / IEC (per model)
- ELE-008 →
Pump Motors
Close-coupled, JM/JP and vertical hollow-shaft motors for pump drives.
- Category
- Close-coupled & vertical
- Standards
- NEMA / IEC (per model)
- ELE-009 →
Low & High Voltage Machines
Large AC induction motors for compressors, big pumps and process drives.
- Category
- Large LV / MV machines
- Standards
- NEMA / IEC (per model)
- ELE-010 →
Synchronous & DC Motors
Synchronous machines for constant speed and power-factor correction, and DC motors for controlled drives.
- Category
- Synchronous & DC
- Standards
- NEMA / IEC (per model)
- ELE-011 →
Severe Duty & General Purpose
Cast-iron, TEFC motors for dirty, wet and corrosive plant environments.
- Category
- TEFC cast-iron
- Standards
- NEMA / IEC (per model)
- ELE-012 →
Hazardous Location Motors
Explosion-proof and dust-ignition-proof motors for classified areas in oil, gas and chemical plants.
- Category
- Explosion-proof / Ex
- Standards
- NEMA / IEC (per model)
- ELE-013 →
System Drive VFD AC Motors
Inverter-rated AC motors for wide speed ranges and constant torque on variable-frequency drives.
- Category
- Inverter / vector duty
- Standards
- NEMA / IEC (per model)
- ELE-014 →
Legacy Motors
Replacements for older or discontinued motors, matched on frame, mounting and performance.
- Category
- Drop-in replacement
- Standards
- NEMA / IEC (per model)
- ELE-015 →
Washdown Motors
Sealed motors, including stainless-steel versions, for food, beverage and pharmaceutical washdown areas.
- Category
- Washdown / stainless
- Standards
- NEMA / IEC (per model)
Request a quote
Quote for Electric Motors
Pick the item, add a few details, and send. Attach nameplate photos or datasheets in the chat.
