1. W22 NEMA Premium – Ball Bearings
- Description
-
High performance with maximum energy efficiency is the goal of the new W22 electric motor. High efficiency and Low cost of Ownership throughout the entire motor lifetime have been the basis for the W22 development. A design created to maximize performance and energy savings.
- New Cooling System
-
Designed to provide optimized air flow through all motor frames keeping low operational temperatures and assuring reliability and extended lifetime. The aerodynamic design of the fan cover optimizes effective airflow, thus minimizing losses due to the recirculation of air between fan and fan cover. The fan was designed to provide strength and reduced noise level. Motor terminal box and eyebolts are positioned on larger frames to allow better airflow.
The new W22 cooling system also contributes to:- Cooler bearing temperature extending relubrication intervals
- Lower Noise Level fulfilling the most demanding Health & Safety regulations
- Lower Overall Operational Temperature resulting in longer life
- Terminal Box
-
- Large internal space making connections more accessible to the user resulting in an easier cable handling and connection
- Terminal box can be mounted on top, left or right site of the motor using the same frame on the 447T and larger motors. Top mounting is optional on smaller frames
- Exclusive Bearing Sealing System
-
- Extends motor lifetime when operating in aggressive environments by protecting the motor against water and dust guaranteeing proper degree of protection
- Frame
-
Motor feet are solid providing a highly resistant structure against vibration. The frame design has points that can be used as provisions for vibration sensors as a standard feature.
Benefits from the new frame design:- Motor temperature reduction
- Eyebolts positioned for easy handling in the application
- Provision for vibration sensors – frame and endshields with provisions 90° displaced according to maintenance technical recommendations. Easier and more reliable vibration analysis
- Solid feet – Enhanced reliability when operating on high vibration applications and also provide easier alignment on installation
- Typical Applications
-
- Pumps
- Fans
- Crushers
- Conveyor belts
- Mills
- Centrifugal machines
- Presses
- Elevators
- Packaging equipment
- Grinders and others
- Standard Features
-
- Efficiency Certification number CC029A according to US Department of Energy Regulations
- Three-phase, 2, 4, 6 and 8 pole, 60Hz
- Voltage: 208-230/460V
- No derating for 50 Hz operation up to 250 HP. For 300 HP and up, please contact our sales office
- Totally Enclosed Fan Cooled – TEFC (IP55) water tight and dust tight enclosure
- Squirrel cage rotor / Aluminum die cast
- WSeal® sealing on both endshields from frame 364T/5T up to 504/5T (586/7 frame fitted with Taconite Labyrinth as standard)
- Ball bearings are supplied as standard
- 1040/45 heat treated and stress relieved carbon steel shafts (4140 for 404/5T upwards in 4, 6 and 8 pole motors)
- Class “F” (?T = 80K) insulation for all frames
- Continuous flow insulation system with class “H” wire (364/5T and larger)
- WEG submerged and bake system with Class “H” wire (324T and smaller)
- Temperature rise limited to Class “B” (80K) @ FL
- NEMA ratings design “B”
- Service Factor: 1.25 up to 100 HP, 1.15 from 125 HP and up
- Continuous duty (S1)
- 104ºF (40ºC) ambient temperature
- Altitude: 3300 ft (1000m
- NPT threaded terminal box
- Stainless steel nameplate AISI 316 with laser etching
- Paint: Synthetic enamel alkyd resin base (240 hours minimum ASTM B117 salt spray test)
- Color: RAL 5009 – Blue
- Fitted with closed rubber drain plug (automatic drain when open)
- Regreasable bearings, with grease fittings in DE and NDE bearings (254T and larger)
- Gasketed conduit box
- CLASS I, DIV. 2, GROUPS A, B, C & D:
- T3 for 1.25 SF motors up to and including 404/5T frames
- T3 for 1.15 SF motors up to and including L449T frames
- T2C for 1.15 SF motors on 586/7
- T2B for 1.0 SF motors on frames L449T and larger
- These temperature codes are not valid for motors operating with VFD and/or with installed space heaters
- CLASS II, DIV. 2, GROUPS F & G:
- T5 for 1.25 SF motors up to and including 184T frames
- T4 for 1.25 SF motors from 213T up to and including 404/5 frames
- T3C for 1.15 SF motors up to and including 586/7 frames
- T4 for 1.0 SF motors on frames L449T, 586/7 and 588/9
- These temperature codes are not valid for motores operating with VFD and/or with installed space heaters
- MGI Part 31 rating for use with VFD – 20:1 constant torque speed range up to 250 HP. Speed range with constant torque can be extended with optional Blower kit
- Optional Features
-
- Special voltages
- Specially designed shaft
- Threaded NDE shaft side for encoder assembly
- Space heaters (standard on 586/7 frames)
- Labyrinth tachonite seal available for all ratings
- Thermostats or RTD’s (Pt-100)
- Additional terminal box
- Drip cover (canopy) for shaft down applications
- Cable glands
- C-Face and NEMA D flanges for all ratings
- C-Face fan cover for accessories or Double C-Face mounting
- Roller bearing models available
- Special epoxy painting
2. W22 Medium Voltage
- Typical Applications
-
- Pumps
- Fans
- Crushers
- Conveyor belts
- Mills
- Centrifugal machines
- Presses
- Elevators
- Packaging equipment
- Grinders and others
- Standard Features
-
- Three-phase, IP55, TEFC
- Frequency: 50 or 60 Hz
- Output: 120 up to 600 HP
- Number of Poles: 2, 4, 6 and 8
- Frames: L447/9 to 588/9
- Mounting: B33R(D)
- Voltage: 1.2 to 6.6 kV
- Class “F” insulation (?T = 80K)
- Continuous duty: S1
- Service factor: 1,15
- Thermal detectors: PT-100 (2 per phase) 3 wires on windings
- Accessories additional terminal box
- Ambient temperature: 40 °C, at 1000 m.a.s.l
- Squirrel cage rotor / Aluminium die cast
- Wseal shaft sealing system
- Drain holes fitted with rubber plugs
- Stainless steel nameplate AISI 316
- Fan Covers: cast iron made
- Fans:
- 2 poles: plastic fans for frames L447/9 and 586/9 and aluminum fans for frames 588/9
- 4 poles and above: aluminum fans
- Regreasing nipples on drive and non-drive end
- NPT threaded cable entries on the terminal box
- Color: RAL 5009 – Blue
- Optional Available
-
- Class “H” insulation
- Thermal protection: Thermistors or Thermostats on winings and bearings, for tripping or alarm
- Degree of Protection: IP56, IP65, IP66, IPW56, IPW65 or IPW66
- Bearing seals:
- Lip seal
- Oil seal
- Labyrinth taconite seal and W3seal
- Space heaters
- Fans: Aluminum, Cast Iron and Bronze
- Drip cover for vertical applications
- Double shaft end
- Encoder
- Cable glands in plastic and brass;
- Blower kit (TEBC)
- Roller bearings
3. W40 – Open Induction Motors – NEMA Premium Efficiency
Description
-
The W40 motors are designed for environments where dirt and moisture are minimal. These motors offer low vibration and sound pressure levels additionally to their improved performance.
- Applications
-
- Pumps
- Fans
- Kneader and mixer machines
- Cutter and sawing machines
- Pressing machines
- Industrial equipment
- Conveyors
- Blowers
- Compressors
- Machinery
- Cranes
- Packaging Equipment
- Standard Features
-
- Three-phase, II and IV poles, 60Hz
- Voltage: 460V to 4160 V
- Degree of protection:
- ODP (IP23) for frames 447/9 to L5810/11
- WPI (IP24) for frame size L6808/09
- Frame material: Cast iron
- NEMA dimensions
- NEMA Design “A” for low voltage motors
- Service factor: 1.15
- Class “F” insulation (80K temperature rise)
- Continuous Duty (S1), 104 °F ambient (40ºC)
- Shaft material: AISI 4140
- Regreasable nipples
- F1 mount (also available flanged motors)
- Paint: Synthetic enamel alkyd resin base
- Color: RAL 5009 – Blue
- NPT threaded terminal box
- Thermal detectors PT-100 on windings (two per phase)
- Additional terminal box for accessories connection
- Stainless steel nameplate – laser etched
- Optional Features
-
- Frequency: 50Hz
- Cable glands
- Terminal block
- Cast iron NEMA “D” flange
- Specially designed shaft
- Second shaft end
- Other thermal detectors on windings or bearings
- Roller bearings on drive end
- IEC metric frames (on request)
4. Single-Phase : ODP (IP22)
Description
Starting capacitors, cast iron frames, rigid base and oversized ball bearings to ensure extended motor life are all standard features.
Remember to considered ambient temperatures and that ODP are suitable where dirt and moisture are at minimum.
Remember to considered ambient temperatures and that ODP are suitable where dirt and moisture are at minimum.
Applications
- Pumps
- Fans
- Conveyors
- Blowers
- Air compressors
- Refrigeration equipment
- Industrial equipment
- Milling machines
- Tools
- Farm equipment
- Aeration equipment
- Other moderate-to-high starting torque applications
Standard Features
- Single-phase, II, IV and VI pole, 60Hz
- Squirrel cage rotor / Aluminum die cast
- NEMA dimensions
- Ball bearings
- Insulation Class ‘F’
- High starting torque
- Continuous Duty (S1)
- 104ºF (40ºC) ambient temperature
- Altitude: 3300 ft (1000m)
- 1045 carbon steel shaft
- F1 mounting T-Box
- NPT threaded terminal box
- Stainless steel nameplate
- Paint: Enamel alkyd resin base
- Color: RAL 7022 – Dark Gray
- Service Factor: 1.25 (ODP only)
- 143/5T steel plate frames
- 182T up to 215T cast iron frames
- Service factor: 1.15
- Automatic drain plugs
- V-ring slingers on both endshields
Optional Features
- Special Voltages and frequency
- Stainless steel shaft
- C and D flanges available for all frames
- F2 mount
5. Wmagnet Drive System
- Typical Applications
-
Specially designed to operate in areas that require reduced vibrations and noise level, maximum efficiency in all speed variations and where the space is restricted:
- Pumps
- Elevators
- Compressors
- Conveyor belts
- Others
- Standard Features
-
- Three-phase, IP55, TEFC
- Output: 11 up to 150 kW
- Base Speed: 1800 and 3600 rpm
- Frames: 213 up to 404/5
- Voltage: 460 V
- Class “F” insulation (?T=80 K)
- Ambient temperature: 40 °C, at 1000 m.a.s.l
- V’Ring on both endshields
- Stainless steel nameplate AISI 316
- Regreasing nipple
- Metric threaded cable entries on the terminal box
- Color: Gray 091A.3145
- Specially designed for use with CFW11 inverter
- Options Available
-
- Mounting: B3, B5, B14, B34, V1, V5, etc
- Degree of Protection: IP56, IP65, IP66 or IPW
- Canopy
- Aluminium, Bronze or Cast Iron Fan
- Space Heaters